Brass, Cast Iron or Forged Stainless Steel Electric & Pneumatic Industrial Floating Ball Valve with Thread / Screw NPT or Bsp Ends

At the same time, we do the job actively to do research and improvement for SS904L Gate Valve, Dual Plate Wafer Check Valve, Through Conduit Knife Gate Valve. The strength of corporate marketing is directly related to the survival and development of the company. We have established a global marketing network platform to serve our customers. For many years, we have been focusing on independent research and development and innovation, and continually developing new products in response to market demand. We sincerely hope to establish some satisfactory relationships with you in the near future.

Product Details

NSV Forged floating ball valves mainly apply to the industries of nature gas, oil products, chemical industry, metallurgy, city construction, medicine, environment, foods, etc.

.The Forged body is much better quality but also much more expensive than cast body,and the ball valve that can make it forged but also can make it as cast from 1/2” to 8”,but when we select it that should be consider the project budget. Sometimes that ball valve must be make it as forged body due to less qty hard to casting for Bronze material,especially for ASTM B62 C83600.

Applicable Standards:
Ball Valve design according to API6D,BS5351,ASME B16.34
Face to face ASME B16.10,AP6D
End Flanges ASME B16.5/ASME B16.47
Butt welded ends ASME B16.25
Fire Safety API607,API6A
Inspection and test API 598,API6D

Material: A105,F304,F316,ETC.
Size Range: 1/2"~8"
Pressure Rating: ASME CL, 150, 300, 600

Design Description:
- Two Pieces or Three Pieces Body
- Metal or Soft Seated
- Full or Reduced Bore
- Flanged or Butt Welded Ends
- Anti Blow Out Stem
- Anti Static Device
- Fire Safe Design
- Locking device
- ISO Mounting Pads (Optional)

STRUCTURAL FEATURES

1.Special Seat Design
The floating ball valve adopts the design of flexible seal ring structure. When the medium pressure is lower, the contact area of seal ring and ball is smaller. so higher sealing ratio is formed at the place where the seal ring and ball contact to ensure reliable sealing. When the medium pressure is higher, the contact area of seal and ball becomes bigger along with the elastic deformation of seal ring, so the seal ring can endure higher medium thrust without being damaged.

2.Fireproof Structure Design
In case of fire during the use of valve, the seat ring made of PTFE or other non-metal materials will be decomposed or damaged under high temperature and cause higher leakage. The fireproof seal ring is set between ball and seat so that after the valve seat is burnt, the medium will push the ball rapidly towards the downstream metal seal ring to form the auxiliary metal to metal sealing structure, which can effectively control valve leakage. In addition, the middle flange sealing gasket is made of metal wound gasket, which can ensure sealing even under high temperature. The fireproof structure design of floating ball valve conforms to requirements in API 607,API 6FA,BS 6755 and other standards.

3.Anti-static Structure

The ball valve is provided with anti-static structure that between ball&stem and stem&body are assembly by a spring&a SS ball,which ensure all metal parts are grounding.

4.Anti-static Structure

The handle stop with locking hole is prevent continually open or close the valve when the valve is in completely open or closed position.Morever,the valve can be locked when don't need.

FAQ

1. Q:Does “NSV” valves have supply to any value end user?

A:Yes,,it just like PETROKIMIA GRESIK in Indonesia, BP Iraq,ESFAHAN MOBARAKEH STEEL In Iran etc.

2. Q:Is there have MOQ?

A：No.we can accept 1set,but there have additional cost $150.00(process of export) if the order value within $2000.00.

3. Q: What's the valves warranty?
A: Our valves warranty period should be 18 months from the date of shipment or 12 months after installation, whichever occurs first

We will provide our customers with energy-saving, high-efficiency and high-quality Brass, Cast Iron or Forged Stainless Steel Electric & Pneumatic Industrial Floating Ball Valve with Thread / Screw NPT or Bsp Ends. The rapid growth of our company's performance, on the one hand, benefits from the steady growth of the industry market scale, on the other hand, it lies in the reasonable formulation and steady implementation of the company's development strategy. Our company insists on 'customer-centric' and 'quality-oriented'. We promise to give back to our customers and make new contributions to economic and social development.