Casting Iron Ductile Iron Non-Rising Stem Resilient Seated Gate Valve

We have high-quality and experienced technical development, production and operation management personnel, specializing in the development of high-quality and low-cost SW/NPT Lubricated Plug Valve, Check Valves, Underground Fully Welded Ball Valve. Focusing on the long-term development of the company, we have formulated the overall development strategy of extending the main business and adopting new innovations as the guiding ideas and the direction of struggle. Customers' gratification is our greatest advertising. We will empower people by communicating and listening, Setting an example to others and learning from experience. We always continually offer you by far the most conscientious customer service, and the widest variety of designs and styles with finest materials.

Product Details

NSV Non-rising stem gate valves it is usually suitable for tight places where there is not enough room for the stem to raise, for example, places with underground pipes. The non-rising stem gate valve is fully open when the handle is rotated as far as possible to the left and fully closed when the handle is rotated as far as possible to the right. In both cases the handle is flush with the pipe because the mechanism inside the pipe opens and closes the valve without raising the stem. Another advantage to the non-rising stem gate valve is that it is easier to padlock. With the rising stem gate valve, two different size padlocks could be needed to lock the valve open and closed. With the non-rising gate valve one padlock is enough. But the disadvantage of a non rising stem valve is the fact that the screw threads that lift the gate are exposed to the fluid being controlled by the valve. This can cause problems if the fluid tends to foul the threads, so non rising stem valves are usually only used on clean liquids and gases.

Applicable Standard
Design Standard: API 600, BS1414, DIN3352
Face to Face: ASME B16.10, EN 558, DIN3202
End Flange: ASME B16.5, ASME B16.47, DIN2533
Butt welding Ends: ASME B16.25, DIN3239
Inspection and Test: API 598, DIN3230

Products Range
Size: 2" ~ 60"(DN50 ~ DN1500)
Rating: ANSI 150lb ~ 2500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
Trim: Per API 600
Operation: Handwheel, Gear, Electric, Pneumatic, Hydraulic

Design Features
NSR
Bolted bonnet, back seal structure
Flexible wedge, fully guided
Flanged or butt-welding ends

FAQ
1. Q:Do you have any valve in stock?
A:There have a lot of GGC valves(2"&within) in stock,and that can delivery within one week.

2. Q:Does "NSV" valves have supply to any value end user?
A:Yes,,it just like PETROKIMIA GRESIK in Indonesia, BP Iraq,ESFAHAN MOBARAKEH STEEL In Iran etc.

3. Q:Is there have MOQ?
A：No.we can accept 1set,but there have additional cost $150.00(process of export) if the order value within $2000.00.

Casting Iron Ductile Iron Non-Rising Stem Resilient Seated Gate Valve are high-quality products controlled by strict procedures. After layer by layer screening and confirmation, they can be used in the consumer market. Therefore, please feel free to buy our products for those who need them. Our company adheres to a fast, efficient, and low-cost service communication, which is based on honesty. Our objective is 'to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us'.