DIN F5 Series Gear Operation Carbon Steel Flanged End Type Non Rising Stem Gate Valve

Each of our Forged Swing Check Valve, C95800 Butterfly Valve, F310 Globe Valve is made of high-quality raw materials, which is the bearing of experience and creativity. Faced with the industry's fierce competition, the integrity management will always operate on the development of our company's most important position. Our products have injected new vitality, and have proud sales performance and good market prospects. We will upgrade in all directions through the continuous innovation and service concept of our products and open up a new world for our cause.

  NSV 4A Floating ball valves mainly apply to pulp and paper mills,chemical processes and seawater service, it is high cracking corrosion resistance to chloride environment,high corrosion resistance to dilute sulphuric acid and phosphoric acid,that suitable for Pulp and paper mills,chemical processes,and seawater service.

• Applicable Standards:
  Ball  Valve design according to API6D,BS5351,ASME B16.34
  Face to face ASME B16.10,AP6D
  End Flanges ASME B16.5/ASME B16.47
  Butt welded ends ASME B16.25
  Fire Safety API607,API6A
  Inspection and test API 598,API6D

Material: Duplex Stainless steel(A995 4A).
Size Range: 1/2"~8"
Pressure Rating: ASME CL, 150, 300, 600

• Design Description:
  - Two Pieces or Three Pieces Body
  - Metal or Soft Seated
  - Full or Reduced Bore
  - Flanged or Butt Welded Ends
  - Anti Blow Out Stem

STRUCTURAL FEATURES

1.Special Seat Design
The floating ball valve adopts the design of flexible seal ring structure. When the medium  pressure is lower, the contact area of seal ring and ball is smaller. so higher sealing ratio is formed at the place where the seal ring and ball contact to ensure reliable sealing. When the medium pressure is higher, the contact area of seal and ball becomes bigger along with the elastic deformation of seal ring, so the seal ring can endure higher medium thrust without being damaged.

2.Fireproof Structure Design
In case of fire during the use of valve, the seat ring made of PTFE or other non-metal materials will be decomposed or damaged under high temperature and cause higher leakage. The fireproof seal ring is set between ball and seat so that after the valve seat is burnt, the medium will push the ball rapidly towards the downstream metal seal ring to form the auxiliary metal to metal sealing structure, which can effectively control valve leakage. In addition, the middle flange sealing gasket is made of metal wound gasket, which can ensure sealing even under high temperature. The fireproof structure design of floating ball valve conforms to requirements in API 607,API 6FA,BS 6755 and other standards.

3.Anti-static Structure
The ball valve is provided with anti-static structure that between ball&stem and stem&body are assembly by a spring&a SS ball,which ensure all metal parts are grounding.

4.Anti-static Structure

The handle stop with locking hole is prevent continually open or close the valve when the valve is in completely open or closed position.Morever,the valve can be locked when don’t need.

FAQ

1. Q:Do you have any valve in stock?

   A:There have a lot of GGC valves(2”&within) in stock,and that can delivery within one week.

2. Q:Do you have customized valve?

A:Yes,we can supply customized valves.

3. Q: What kinds of valves do you manufacture?

A: We usually manufacture valves made of various materials such as cast Iron/ carbon steel,stainless steel,Alloy steel and industrial valves such as ball, gate, globe, check, bellows seal and ETC. For detail information, please refer to " Download>E-Catalog” of homepage.

4. Q:What's the packing for shipping?

  A:Its carton for small valves(sample) and plywood case(don’t to fumigate).

5.Q: How about delivery schedule?

A: Delivery schedule depends on product type. Therefore, please consult with sales team for specific delivery schedule when you inquire quote. The company is making an effort to keep the delivery schedule, which is the promise with customer. The company will improve your satisfaction degree by delivering the necessary product as soon as possible.

Since its establishment, the company has made it its mission to build an industry-leading business for DIN F5 Series Gear Operation Carbon Steel Flanged End Type Non Rising Stem Gate Valve, integrate resources to the greatest extent, and create and deliver value. Our company adheres to the tenet of professional expertise and goodness, following the concept of modern enterprise management. Welcome domestic and foreign merchants to visit and negotiate. We strive to provide high-quality products, technologies and services, show a good image of social responsibility, and satisfy employees, customers, shareholders, the public and the people of the country where the business is located, and strive to become highly responsible company.