DIN3352 F4 Ductile Iron Resilient Seated Non-Rising Stem Gate Valve

Our company has been adhering to the principle of seeking development through science and technology for many years and is always at the forefront of the Single Block And Bleed Ball Valve, Y Pattern Globe Valve, Underground Fully Welded Ball Valve industry, which makes our products sell well both at home and abroad. So you should make contact with us by sending us emails or call us if you have any questions about our corporation. The company has a first-class professional marketing team. So we provide our clients with high quality products and excellent service. Along the way, we have innovated in complex and difficult application fields, and developed a number of new technologies to meet market needs.

Product Details

NSV Non-rising stem gate valves it is usually suitable for tight places where there is not enough room for the stem to raise, for example, places with underground pipes. The non-rising stem gate valve is fully open when the handle is rotated as far as possible to the left and fully closed when the handle is rotated as far as possible to the right. In both cases the handle is flush with the pipe because the mechanism inside the pipe opens and closes the valve without raising the stem. Another advantage to the non-rising stem gate valve is that it is easier to padlock. With the rising stem gate valve, two different size padlocks could be needed to lock the valve open and closed. With the non-rising gate valve one padlock is enough. But the disadvantage of a non rising stem valve is the fact that the screw threads that lift the gate are exposed to the fluid being controlled by the valve. This can cause problems if the fluid tends to foul the threads, so non rising stem valves are usually only used on clean liquids and gases.

Applicable Standard
Design Standard: API 600, BS1414, DIN3352
Face to Face: ASME B16.10, EN 558, DIN3202
End Flange: ASME B16.5, ASME B16.47, DIN2533
Butt welding Ends: ASME B16.25, DIN3239
Inspection and Test: API 598, DIN3230

Products Range
Size: 2" ~ 60"(DN50 ~ DN1500)
Rating: ANSI 150lb ~ 2500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
Trim: Per API 600
Operation: Handwheel, Gear, Electric, Pneumatic, Hydraulic

Design Features
NSR
Bolted bonnet, back seal structure
Flexible wedge, fully guided
Flanged or butt-welding ends

FAQ
1. Q:Do you have any valve in stock?
A:There have a lot of GGC valves(2"&within) in stock,and that can delivery within one week.

2. Q:Does "NSV" valves have supply to any value end user?
A:Yes,,it just like PETROKIMIA GRESIK in Indonesia, BP Iraq,ESFAHAN MOBARAKEH STEEL In Iran etc.

3. Q:Is there have MOQ?
A：No.we can accept 1set,but there have additional cost $150.00(process of export) if the order value within $2000.00.

We adopt a serious and rigorous business attitude, and we recommend only the most suitable DIN3352 F4 Ductile Iron Resilient Seated Non-Rising Stem Gate Valve for customers, so as to maximize processing efficiency and reduce processing costs. Our company has established a complete marketing service system, relying on outstanding advantages in talents, technology, resources, information, etc., to provide you with complete, fast and professional support and services. We strictly and conscientiously fulfill our contracts, fulfill our promises, strengthen our after-sales service network system, and guide our services with newer and higher thoughts.