Dn50-Dn900 Class150-Class600 Cast Steel Flange Swing Check Valve

It is our responsibility to meet customer needs, and we strive to provide customers with mature Tilting Disc Wafer-Flange Check Valve, SS904L Check Valve, Al-Bronze Alloy Valves and technical services with integrity and thoughtfulness. We own a complete independent R&D team, production team, and after-sales service team. We can quote you according to the quantity you ordered. The more the quantity, the lower the price.

Product Details

NSV Cast Steel Swing check valves, like all check valves, are used to prevent back flow in the line. The pressure of the fluid passing through a system opens the valve, while any reversal of flow will close the valve. The swing check valve functions by allowing flow forces to move the closure element, it is a hinged clapper which swings or rotates around a supporting shaft.

Applicable Standard
Design Standard: BS 1868, ASME B16.34, API 6D, DIN2533
Face to Face: ASME B16.10, API 6D, EN 558, DIN 3202
End Flange: ASME B16.5, ASME B16.47, DIN2501, DIN2533
Butt welding Ends: ASME B16.25, DIN3239
Inspection and Test: API 598, DIN3230

Products Range
Size: 2" ~ 24" (DN50 ~ DN600)
Rating: ANSI 150lb-1500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
Trim: Per API 600

Design Features
Full open design
Bolted cover
Swing type disc design
Renewable or and welded seat
Flanged or butt welding ends

STRUCTURAL FEATURES

◎ Body--Cover

Precision machined castings.
Exclusive: Disc shaft does not penetrate body.

◎ Body and Cover

Body and cover joint: Accurately machined,
fully-enclosed gasket.

◎Disc

Robust one-piece construction to withstand the severe shock of check valve service. Hardfaced with 13Cr, CoCr alloy, SS 316, or Monel, ground and lapped to a mirror finish. Sizes NPS 2–6 (DN 50–150) may have solid CA 15 (13Cr) disc. SS 316 disc with CoCr alloy facing also available.

FAQ

1.Q: What’s the brand of your company can supply ?

A:NSV or OEM service

2.Q: Do u provide sample,is it free or extra ?

A: Yes, we could offer the sample, due to its value,we can supply free sample that small value and you afford the freight,but also welcome visit our factory to inspect quality.

3.Q: What’s your payment terms?

A: As our company’s policy, we normally have bellow 3 payment terms,it also can negotiation both parties before confirm order.
1) 100% T/T or West Union in advance that order value within $2,000.00USD.

2)30% T/T advance+70% balance after the shipment for the order value above $2,000.00USD.

3)L/C at sight for the order value above $50,000.00USD.

'Practical and innovative, dedicated and efficient' is our entrepreneurial spirit. We are dedicated to solving all kinds of problems for you with economic and reasonable Dn50-Dn900 Class150-Class600 Cast Steel Flange Swing Check Valve and high-quality and perfect services. In many factors of product quality, talent is the decisive factor. Building talent camp is an important part of our company's development strategy. Our company gathers professional elites with innovative consciousness, relying on modern business philosophy, advanced management mode, strong R&D ability and perfect service system, our products are widely praised from all walks of life.