Industry Single Body Flanged Ball Valve 304/316/Wcb

We've been committed to offering easy, time-saving and money-saving one-stop purchasing support of consumer for C95800 Gate Valve, Nickel Alloy Valves, A494 CW12MW Ball Valve. In recent years, we have followed the trend of the market and launched timely excellent products and have gained a good reputation in the industry. Guided by market demand, we integrate resources and pursue to create more, better and more suitable high-quality products for consumers. With persistent belief and unrepentant pursuit, we have created a solid foundation for the company's career development.

Product Details

NSV Pneumatic Actuator ball valve, is a new generation of high performance ball valve, suitable for long-distance pipeline and general industrial pipeline, its strength, safety, resistance to harsh environment and other special considerations in the design, suitable for a variety of corrosive and non-corrosive media.

Compared with the pneumatic actuator floating ball valve, when working, the fluid pressure in front of the valve on the ball all the forces produced to the bearing, will not make the ball to the valve seat movement, thus the valve seat deformation is small, the sealing performance is stable, the service life is long, is suitable for the high pressure, the large diameter occasion.

Applicable Standards:
Ball Valve design according to API6D,BS5351,ASME B16.34
Face to face ASME B16.10,AP6D
End Flanges ASME B16.5/ASME B16.47
Butt welded ends ASME B16.25
Fire Safety API607,API6A
Inspection and test API 598,API6D

Products Range
Size: 2" ~ 48"(DN50 ~ DN1200)
Rating: ANSI 150lb ~ 2500lb
Body Materials: Carbon steel, Stainless steel
Trim: A105+ENP, 13Cr, F304, F316
Operation: Pneumatic actuators

Design Description:
- Two Pieces or Three Pieces Body
- Soft Seated
- Full or Reduced Bore
- Fire Safe Design
- Locking device

STRUCTURAL FEATURES

1.Urgent grease injection device

According to customers' requirement, the trunnion ball valves made by Our company are provided with devices for urgent grease injection, which are on both the stem and seat for the trunnion ball valves of DN>150mm (NPS6), and in the body cavity for the valve of DN<125mm. When the O ring of stem or the body seat ring is damaged due to accident, the medium leakage between body and stem can be prevented by injecting the sealing grease through the device.

2. Self-relief in the body cavity

As the liquid medium left in the body cavity gasifies due to increased temperature, the pressure in the body cavity becomes abnormally higher when the medium itself in the cavity would propel the seat and self-relieves the pressure to ensure the safety
of valve.

3.BG Series Pneumatic actuator(Scotch&Yoke type actuator)

Advantages

Water Ingress Protected

O-ring are fitted on the bodies,caps and so on,this ensure water ingress protected.

Wear Resistant

The guide rod and piston rod have and advanced surface treatment,which combined with self-lubricating bearings,provides superior wear resistance and extends the life of all sliding components.

Standardization

The shaft driven accessory interface conforms to NAMUR and is identical on all BG series models,allowing standardization of accessory mounting hardware and installation practices.

ISO Valve Mounting

The BG series actuators interface meets ISO standard, and meets the dimensional requirements of ISO defined for each torque range.

Corrosion Resistant

The BG series actuators incorporate over three stages of internal and external coatings to resist severe weater,chemical and petroleum environments.The inner surface of cylinder is coated by PTFE,enhanced corrosion resistant and self-lubricating.

Safe Spring Module

To ensure the safety of personnel during installation and maintenance.the spring module has been designed so that it can only be removed from the power module with the spring in the fully extended position.This prevents accidental release of the spring force,protecting personnel from injury and the actuator from accidental damage.

4.Pneumatic Actuator workshop

FAQ

1. Q: What’s the brand of your company can supply ?

A:NSV or OEM service

2. Q: What’s the valves warranty?
A: Our valves warranty period should be 18 months from the date of shipment or 12 months after installation, whichever occurs first.

3. Q: What’s your payment terms?

A: As our company’s policy, we normally have bellow 3 payment terms,it also can negotiation both parties before confirm order.
1) 100% T/T or West Union in advance that order value within $2,000.00USD.

2)30% T/T advance+70% balance after the shipment for the order value above $2,000.00USD.

3)L/C at sight for the order value above $50,000.00USD

We are a professional enterprise of manufacturing Industry Single Body Flanged Ball Valve 304/316/Wcb, with strong technical force, warm and thoughtful service and novel business philosophy. We provide wholesale prices on all our quality parts so you are guaranteed greater savings. Since our establishment, we keep on improving our products and customer service.