1. It is not possible to connect the three-phase power supply to the two-phase power supply. It is necessary to distinguish whether the purchased model is a 380V or 220V power supply. Similarly, the 220V power supply cannot be connected to the 380V power supply model, otherwise it will cause unnecessary losses.
2. For the outside line, the leakage switch or air switch must be installed separately, and it cannot be shared with other high-power equipment to avoid damage and abnormal use of the equipment.
3. If the button or switch is damaged and needs to be replaced, please replace it with the original factory connection method, and do not change it arbitrarily.
4. The internal wiring of the machine can not be arbitrarily changed and disconnected
5. Can not cut off the power directly during the operation of the machine
6. It is necessary to strictly follow the operating instructions to use the program steps. It is not easy to avoid or set up casually to prevent the machine from running abnormally.
7. The output cable of the platform should be connected to the vertical or horizontal output port, otherwise it will not vibrate.
8. Avoid one-time adjustment too large, otherwise it will produce severe vibration or abnormal work
9. When working, you can't set the frequency directly through the △▽ button on the control panel!
10. The △▽ key on the control panel is used to modify the parameters of the program and the setting of the power on to 0. The frequency cannot be set directly.
